Version 1, 11 July 2017, Page
1
of
5
Ezy-Wash
®
Pre-Rinse Tapware
PRODUCT CODE:
-
TF83HJS
-
TF83HJP
TF83HJS TF83HJP
SPECIFICATIONS
Galvin Specialised recommends the installation of strainers and pressure reducing valves prior to installing
the pre-rinse unit to ensure clean consistent water supply. Debris or poor water quality could cause the
trigger to seize or fail to seal.
This pre-rinse unit has a 6 star WELS rating, the Pot Filler attachments are 0 star to allow fast pot filling.
The hose on these units is not suitable for potable water and should only be used for washing down/
cleaning purposes.
TECHNICAL DATA
Inlet
½” BSP – Male
Outlet
TF83HJS
Trigger Spray
TF83HJP
Trigger Spray & Pot Filler
Headworks
TF83HJS
Jumper Valve
TF83HJP
Jumper Valve
Working Pressure Range (kPa)
Min
100
Max
500
Working Temperature Range (°C)
Min
5
Max
65
Nominal Flow Rate (LPM)
TF83HJS
3.5
TF83HJP
15
Finish
Chrome
NOTE:
Galvin Specialised continually strives to improve their products. Specifications may change without
notice. Higher temperature or pressures could result in premature failure and void the manufacturer’s warranty
.
TOOLS REQUIRED
Adjustable spanner
Hex key
Power drill
