Version 1, 31 October 2016, Page
1
of
4
Ezy-Drink
®
Remote Bubbler Tapware
PRODUCT CODES:
-
TD45C
-
TD90C
SPECIFICATIONS
−
Drinking taps are designed to operate at full mains pressure.
−
Rubber and metal mouthguards are designed to help protect teeth when drinking.
−
Rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
−
Vandal resistant handle.
−
Adjustable built-in flow restrictor.
IMPORTANT: All Ezy-Drink
®
Remote Bubbler taps are tested in accordance with AS/NZS 3718 and leave our
premises in good working order.
TECHNICAL DATA
Inlet
15BSP - Female
Outlet
Rubber / metal mouth guard
Headwork
Cam Action
Working Pressure Range (kPa)
Min
50
Max
500
Maximum Working Temperature (°C)
Min
5
Max
70
Nominal Flow Rate (LPM)
4.5
Finish
Chrome
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
PRE-INSTALLATION
MOUNTING DETAILS – HOLE CENTRES
−
TD90C - If the mounting holes do not already exist, mark
out and drill the holes in the wall/sheet, as shown in
rough-in dimensions.
Note: Before installation, all lines must be flushed. We
recommend that a line strainer be installed prior to drinking taps
to eliminate any foreign material.
TOOLS REQUIRED
−
Power drill
−
Spanner or adjustable crescent
−
Screw driver
50.5
TO SUIT
SCREWS
USED
