7
Version 1, 21 August 2019, 7 of 21
Continuous
run
Activate
1x
minimum 3 sec
.
(max. 5 sec.)
Water flows after releasing
0.5-20 min.
(in 0.5
steps) min.
Continuous
run
Stop
1x
app. 2 sec.
Manual stop
or automatic
Automatic after preset time
Follow up
Time control
For normal
operation
Set / program
1x
app. 2 sec. till
1x
Extended function mode is active
1 sec.
0-10 sec.
1x
app. 5 sec. till
1x
1x
0 - 10 sec.
Keep touched
+
1x/sec., water flows during
touching - releasing defines
duration
after releasing
1x
Confirmation, ready for operation
Time of water
flow For
continuous
run
1x
app. 2 sec. till
1x
Extended function mode is active
5 min.
0.5-20 min
(in 0.5 min
steps)
1x
minimum 3
sec. (max. 5 sec.)
+
Touch max. 5 sec., water flows
after releasing, number of
(1x-
40x) shows current setting
1x
keep touched
till
1x - 40x
1x
=0.5 min. .... 40x
= 20.0
min.
releasing defines duration
after releasing
+
1x
check / confirmation of setting by
repeating number of
(1x - 40x)
according to setting
line purge
feature
activate /
deactivate
<< Automatic
flush on set
interval>>
(time of
waterflow: 3
min)
1x
app. 2 sec. till
1x
extended function mode is active
12h
Off
12 h
24 h
48 h
1x
app. 25 sec. till
1x - 4x
1x= off,
2x=12h,
3x= 24h,
4x= 48h ignore flashes after 5 sec.
and 10 sec.
– keep touched till
1x - 4x after app. 25 sec.,
releasing defines interval
Wait till
1x
Confirmation, ready for operation
restart
electronics
1x
app. 2 sec. till
1x
extended function mode is active
2x
a app. 0,5 sec
pulsing during active function
1x
app. 5 sec. till
4x
1x/sec.
Release and wait till
+
1x/sec., keep out of sensor
area
Wait till
1x
confirmation, ready for operation
7.0
COMMISIONING
Do not remove the black label in front of sensor faceplate until the tap is to be commissioned.
Initial Test for Correct Operation
The following must be checked to ensure the correct performance of the progressive thermostatic mixer:
−
the supply pressures and temperatures are within the range of operating pressures and temperatures
for the thermostatic valve.
−
the supply temperatures are within the range permitted for the unit.
XXX
XXX
