© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 6
th
July 2022, Page
1
of
5
SS Vandal Resistant D/F Plate Assembly
for Pneumatic Inwall Cistern w/ CP BS
Raised Buttons
PRODUCT CODES
-
656512
SPECIFICATIONS
−
Face plate assembly features pneumatic dual flush push activation buttons for CIST19-PNEU-2 Slim-
Line Inwall Cistern.
−
2mm thick, Vandal resistant stainless steel faceplate.
TECHNICAL DATA
Activation
Push Button
Connections
Pneumatic
Hose Length
3 metres
Finish
Polished
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without
notice.
MOUNTING DETAILS
If a cut out is required, refer to the face plate position and cut out details below.
-
The push button can be positioned as preferred but consideration should be given to ensure it is easily
accessible for children and adults.
-
A 70mm x 140mm x 80mm cut out is required in the wall to fit the two push buttons. Drill two holes 160
mm from centres as shown for two nylon wall plugs 8 X 40 (NWP8).
