© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 19 October 2022, Page
19
of
25
12.0
DISINFECTION
1. Remove the Disinfection Key cover
2. Hang the warning tag plate on the Disinfection
Key, insert the Disinfection Key and turn it 180°
(direction not important). Place the warning tag in
the keys’ gr ve. t v te “C nt nu us run”
Function (See section 7.2
WARNING:
Spout and water temperature flowing out
from spout during disinfection period might be very
hot and cause scalding.
3. Turn the Disinfection Key 180° to remove it and install the key cover.
Note: A disinfection kit is available. For more information, please visit www.galvinengineering.com.au.
