ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 53 of 132
4.3 Integral Keypad and Status LEDs
The integral membrane keypad used to retrieve, edit, and save parameter values
to the ViscoSite transmitter is located below the LCD on the front of the swing
panel.
The keypad is located inside the ViscoSite transmitter’s enclosure
and should be
accessed ONLY if the area is known to be non-hazardous.
DO NOT OPEN THE TRANSMITTER ENCLOSURE if it is installed in hazardous
environments UNLESS and UNTIL the area has been de-classified and is known
to be non-hazardous.
The keypad and status LEDs are shown in Figure 4.2.
Figure 4.2: ViscoSite Transmitter Keypad and Status LEDs
