ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 22 of 132
2.5 ViscoSite Transmitter
The ViscoSite transmitter comprises
•
The transmitter motherboard which contains:
•
3 user programmable Isolated Analog Outputs;
•
2 Digital Relay Outputs for remote data collection and alarm monitoring;
•
1 Isolated Analog Input (Density ONLY);
•
Multiple Communications Options
–
Modbus RTU over Ethernet, USB,
and RS232C/RS485.
•
The transmitter LCD, Status LEDs, and Membrane Keypad mounted on a
swing panel internal to the transmitter enclosure;
•
The syste
m’s
power supply and conditioning circuitry (AC/DC or DC/DC as
appropriate);
•
Intrinsically Safe (IS) barriers (as required);
•
Ethernet and USB connection ports for connecting to the transmitter to a
computer
locally
(USB) or
remotely
(Ethernet over LAN via the
transmitter’s
IP address) using the Modbus RTU protocol.
The above components are housed in a fiberglass enclosure. The enclosure
features a latch closure transparent hinged front door. The LCD and keypad panel
are mounted within the enclosure and swing outward to provide access to the
transmitter electronics for connection of the transducer, output wiring, density
input wiring, and RS232/RS485 as required by your application.
The ViscoSite transmitter installed the standard fiberglass enclosure is shown in
Figure 2.4.
Figure 2.4: ViscoSite Transmitter (Inside Enclosure)
