Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 76 / 87

-74-
Clear Results
Choose Clear Results (1-4) to clear the historic data stored in the buffer.
6.6.5.6 Reset Alarms
This menu displays the status of the 4 Alarms.
ACTIVE in the status block with RED background indicates Alarm is ON.
In order to clear the Alarm, choose the Alarm with ACTIVE in the Status block
and choose Clear ALARM key.
6.6.5.7 Software Revision
The Menu displays the current Version Number of GUI and Messenger.
The Messenger Version will be displayed only when GUI is connected Online.
6.6.6 Set Cleaning Event
You can program up to TWO cleaning events.
A cleaning event is an automatic cycle that allows the optics to be CLEANED by
the introduction of a cleaning solution to flow through the cell.
For each Cleaning Event, you can specify the Cleaning Frequency , Cycle
Duration and Purge Time (Time to allow the Sample to flow and purge out the
cleaning solution). A Relay can be assigned to a Cleaning Event, which will be
active only during the Cycle Duration.
Cleaning Events can be activated in 2 ways, automatically or through Assigned
Digital Inputs.