Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 68 / 87

-66-
ACTIVE ON:
As long as assigned function is TRUE The Relay stays in activated state.
For Example:
The Alarm 1...4 are selected and thresholds are defined in the Set Alarm menu. If
we set an Alarm on Result 1 exceeding a threshold of 100 and we assign Relay
#1 as an indicator of such Alarm condition, the Relay#1 is activated when this
threshold is reached or exceeded based on the Alarm mode latching or NON-
latching. It would reset when the Result is back below the threshold defined.
ACTIVE OFF Fail Safe:
As long as the Assigned signal is FALSE the Relay stays in activated state
For Example:
The Alarm(s) 1...4 are selected and thresholds are defined in the Set Alarm
menu.
If we set an Alarm on Result 1 exceeding a threshold of 100 and we assign Relay
#1 as an indicator of such Alarm condition, the Relay#1 is NOT activate as long
as the Alarm condition is TRUE.
6.6.5 Diagnostic Menu
This menu is provided with diagnostic tools.
Choose
Main menu > Diagnostic Menu,
you will see a list of Diagnostic options.

File menu

View Channel Output

Adjust Hardware settings

Hardware Test

Software Revision

Clear Reset Menu