Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 64 / 87

-62-
6.6.3.9 Bubble Reject Threshold
Bubble Reject Filter is used to smooth system response when bubbles are
passing and based on a data averaging and acts upon a threshold limit set by the
user in %change detection.
Choose Bubble Reject textboxes to specify the % Threshold.
Choose Filter Delay textboxes to specify the delay in sec.
6.6.3.10 Set Results Format
You can format the results displayed in Measurements screen.
Choose Number of Decimal Places for each Result to specify the precision with
which the result needs to be displayed in Measurements Screen.
Choose Allow Values for each Result to specify whether POS (Positive values)
or ALL (Positive and Negative values) to be displayed in Measurements Screen.
6.6.3.11 Set Results Offsets
Choose OFFSET TO RESULT (1…4) text box to specify the Offset.
The Offset Specified here will be a part of the Setup Results Equations.
6.6.4 Setup Inputs/Outputs Menu
You can configure the Inputs / Outputs of the Messenger Device.
Choose Main Menu > Setup Inputs / Outputs Menu. You will see the following
Options.

Set LCD Display

Set Analog Outputs

Assign Digital Inputs

Set Alarms

Set Messenger Unit ID

Set Relay Functions