Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 60 / 87

-58-
View/Edit Calibration
The selected Sensor number appears on the top. The data present in the selected
factory calibration table can be viewed/edited using the following option.
To edit user value or data, Tap/Click on the block.
Choose Graph to view the curve fit based on the Fit Type selected.
Choose Edit Sensor Equations to alter the Sensor Equations.
6.6.3 Setup Results
The Setup Results are used for formatting the output that is to be displayed to
the user, which is captured from different sensors
Choose Main Menu > Setup Results Menu. You will see different Options to
format the output

Setup Results Nametags

Setup Results Equations

Setup Sensor Equations

Setup Numerical Results

Setup Graphical Results

Set Results Units

Setup Data logging

Bubble Reject Threshold

Set Results Format

Set Results Offset
6.6.3.1 Setup Results Nametag
Choose the Result (1...4) Text box to specify the Nametags to be displayed for
results captured in the Measurements Screen.
For Example: - If the data captured in Result1 is Turbidity then the Nametag for
Result1 can be given as "Turbidity"