Galvanic Applied Sciences 962-AGX, Operation Manual

Page: 27 / 100

Revision 1 27 9/10/2019
The dot in the upper right corner indicates that the system is monitoring a sample. If the
system is monitoring samples it will be green. If the
Back Purge
function is selected (see
Section 4.3.5), the system is performing a Manual Zero operation (Section 4.3.4) or if the
system is offline, the dot will be red. This dot is common to all panels.
4.2.2 The Hand Held Keypad
The hand held keypad (Figure 4-2) is used to navigate between the various panels and enter
information.
Figure 4-2: Hand Held Keypad
The buttons on the keypad provide the following:
• Panel Prev - Changes the active panel to the previous panel.
• Panel Next
- Changes the active panel to the next panel.
• Field Prev
- Moves the cursor to the previous entry on the active panel for editing.
• Field Next - Moves the cursor to the next entry on the active panel for editing.
• Home - Returns the Analysis 1 panel.
• Purge
- Toggles from Back Purge to Sample.
• Del -
Deletes the last numerical value.
• Exit - Erases the current input.
• Enter - Used to enter numerical information on various tabs.