Galvanic Applied Sciences 943-TGX-CE, Operation Manual

Page: 63 / 151

Revision 4 63 April 2020
Figure 38: Calculation Sub-Panel
To edit any parameter on this page, use the F4 / F3 keys to highlight the desired parameter,
then press
↵
to enter the editing dialog. Use the numerical keys and the decimal point key to
enter in the desired value, then press
↵
. Select the Okay button and press
↵
again. Once all
desired edits have been completed, select the Save button at the bottom right of the screen
and press
↵
to save changes permanently. Alternatively, selecting Revert and pressing
↵
will
return all edited values to their previously saved values.
Unauthorized modification of the values of ANY of the calculation parameters
listed in on this sub-panel could negatively affect the validity of data output by
the analyzer. Calculation-related parameters should ONLY be changed by factory-
trained personnel or under the direction of Galvanic Applied Sciences Inc.
4.8.2.1 Calculation Parameters
The calculation parameters outlined in red are explained in Table 13.