BOXFINDER (0001) User’s Manual
RSA “Galileosky”, LLC.
Page
36
12.
GALILEOSKY protocol parameters
The number of bit is entered in commands mainpackbit and headpackbit to select parameters transmitted
to the server.
Bit
№
Description
1 Tracker version
2 Firmware version
3 IMEI
4 Device’s identifier
5 Number of an archive record
6 Date and time
7 Coordinates in degrees, number of satellites, indication of coordinates determination
correctness
8 Speed in km/h and direction in degrees
9 Height, m
10 HDOP, if the source of coordinates is GLONASS/ GPS-module.
CEP-radius, if the source of coordinates is basic cellular network stations.
13 Internal battery voltage, mV
16 Relay status
17 Status of inputs, bit mask:
The lower bit – activating on IN input.
The second bit – low level of battery charge.
The third bit – activating opening sensors.
18 Input value.
In accordance with settings, voltage is in mV or frequency is in hz.
24 Thermometer’s identifier 0 and measured temperature,
°
С
25 Thermometer’s identifier 1 and measured temperature,
°
С
26 Thermometer’s identifier 2 and measured temperature,
°
С
27 Thermometer’s identifier 3 and measured temperature,
°
С
28 Thermometer’s identifier 4 and measured temperature,
°
С
29 Thermometer’s identifier 5 and measured temperature,
°
С
30 Thermometer’s identifier 6 and measured temperature,
°
С
31 Thermometer’s identifier 7 and measured temperature,
°
С
32 Identification number of the first iButton key
52 Identification number of the second iButton key
54 State of iButton keys, identifiers of which are set buy command iButtons
