ADP 4100 Printer
Clearing Stock Jams
The figure below defines the paper path areas in the transport
mechanism.
To clear a ticket stock jam, use the following procedure:
1. Note the location of the jam indicated on the display and refer to
the figure above to locate the corresponding area where the jam
occurred.
2. Press the RESET key. The Unit will attempt to clear the jam.
3. If the Document Path Jam message is cleared, press the ONLINE
key to continue operation.
4. If the jam condition persists, complete the following procedure:
WARNING
To prevent personal injury, REMOVE POWER before manually
clearing ticket stock jams.
5. Toggle the power switch to
O
(OFF) and disconnect the power
cord from the rear of the Unit.
CAUTION
Take caution when opening the left side door. Refer to
“Installation” sectionfor details on how the left door opens and the
space required.
ADP 4100 Printer
Installation and Operators Manual
, April 2007
21
