68
•
Chapter 6 Programming Motion
DMC-1000
If no new data record is found and the controller is still in the contour mode, the controller waits for
new data. No new motion commands are generated while waiting. If bad data is received, the
controller responds with a ?.
Command Summary - Contour Mode
COMMAND DESCRIPTION
CM XYZW
Specifies which axes for contouring mode. Any non-contouring axes may be operated in
other modes.
CM
ABCDEFGH
Contour axes for DMC-1080
CD x,y,z,w
Specifies position increment over time interval. Range is +/-32,000. Zero ends contour
mode.
CD
a,b,c,d,e,f,g,h
Position increment data for DMC-1080
DT n
Specifies time interval 2
n
msec for position increment, where n is an integer between 1 and
8. Zero ends contour mode. If n does not change, it does not need to be specified with each
CD.
WC
Waits for previous time interval to be complete before next data record is processed.
Operand Summary - Contour Mode
OPERAND DESCRIPTION
_CS
Return segment number
General Velocity Profiles
The Contour Mode is ideal for generating any arbitrary velocity profiles. The velocity profile can be
specified as a mathematical function or as a collection of points.
The design includes two parts: Generating an array with data points and running the program.
Generating an Array - An Example
Consider the velocity and position profiles shown in Fig. 6.5. The objective is to rotate a motor a
distance of 6000 counts in 120 ms. The velocity profile is sinusoidal to reduce the jerk and the system
vibration. If we describe the position displacement in terms of A counts in B milliseconds, we can
describe the motion in the following manner:
(
)
ω
π
=
−
Α
Β
Β
1
2
cos(
)
Χ =
−
AT
B
A
B
2
2
π
π
sin(
)
Note:
ω
is the angular velocity; X is the position; and T is the variable, time, in milliseconds.
In the given example, A=6000 and B=120, the position and velocity profiles are:
X = 50T - (6000/2
π
) sin (2
π
T/120)
Note that the velocity,
ω
, in count/ms, is
ω
= 50 [1 - cos 2
π
T/120]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
