Galeo PC78MR-6, Operation & Maintenance Manual

Page: 69 / 295

.
OPERATION
DETAILED CONTROLS AND GAUGES
SWITCHES
(1)
(2)
(3)
(4)
(5)
(6) Starting switch
Fuel control dial
Swift deceleration switch
Horn switch
Lamp switch
Alarm buzzer stop switch (7)
(8)
(9)
(10)
Pump drive emergency switch
Emergency boom swing operation/brake cancel
switch
Room lamp switch
Cigarette lighter
Starting Switch
Starting switch (1) is used to start or stop the engine.
OFF position
The key can be inserted or withdrawn. The switches for the electric
system except the room lamp and service meter are all turned off
and the engine is stopped.
ON position
Electric current flows in the charging and lamp circuits. Keep the
starting switch key at the ON position while the engine is running.
START position
This is the engine-start position. Keep the key at this position during cranking. Immediately after starting the engine,
release the key. It will automatically return to the ON position.
HEAT (pre-heat) position
When starting engine in cold weather, set the key to this position. When the key is set to the HEAT position, the
pre-heating monitor lights up. Keep the key at this position until the monitor lamp flashes. Immediately after the
pre-heating monitor flashes, release the key. The key automatically returns to the OFF position. Then, start the
engine by turning the key to the START position.
3 - 14