Gale Banks Engineering
546 Duggan Ave.,
Azusa, CA 91702
PH (626) 969-9600
Fax (626) 334-1743
bankspower.com
Product Information & Sales:
(888) 635-4565
Customer Support:
(888) 839-5600
Installation Support:
(888) 839-2700
Start Up
Press ‘ON/OFF’ button on top left side to turn ‘ON’.
Turn your vehicle on to ‘WAKE UP’ Banks iQ from
‘SLEEP’ mode.
Note: If Banks iQ does not ‘WAKE UP’ from ‘SLEEP’
mode, make sure the USB interface connection is
connected and the sliding switch on the left side is slid
up to the ‘ON’ position.
Changing Power Levels
From the Power Mode, press the ‘UP’
p
or ‘DOWN’
q
arrows on the right of the guage screen to increase or
decrease the current power level.
* “CHANGING POWER SETTINGS”- refer to owner’s
manual for further details”
Changing Brake Settings
From the Safety Mode, use the ‘UP’
p
or ‘DOWN’
q
arrows in the ‘MANUAL’ mode to adjust braking force.
Use the ‘UP’
p
or ‘DOWN’
q
arrows in the ‘AUTO’
mode to raise or lower downhill target cruising speed.
* “CHANGING BRAKE SETTINGS”- refer to owner’s manual
for further details”
©2012 Gale Banks Engineering
P.N. 96804 v.5.0
Contact Us!
ON-SCREEN ALERTS
On-screen
alerts can be set to notify you when
engine conditions reach your pre-set
limits. EGT, engine temp and trans
temp are monitored continously.
SYSTEM
STATUS
ENGINE TEMP
OIL TEMP
CHECK ENGINE
EGT
TRANS TEMP
SPEED BRAKE
SEARCH
FOOT BRAKE
NAVIGATION ICONS
iQ ICON
RETURN TO
‘MODE’ SCREEN.
RETURN ICON
RETURN TO THE
PREVIOUS SCREEN.
iQ HOME
RETURN TO
“MODE SELECT’SCREEN.
WRENCH ICON
GO TO THE
‘ADJUSTMENTS’ MENU.
Performance, Productivity,
and Entertainment Mode
For detailed information about using these Modes, please
refer to your Banks iQ Owner’s Manual.
96804-BanksiQ-quickref-v5.indd 1
5/18/12 3:11 PM
