background image

10 SELF EXTN NO./ RING CHECKING

This facility makes you to check your Extn No. & your Extn
is ringing or not, for this lift the handset dial your own Extn
No or if you do not know your Extn No. dial # + 0 + *.
Now your are being announced with your Extn No. Put down
the handset, now your Extn starts ringing, if your Extn is
equipped with CLI Phone then your Extn No is also
displayed on your Phone.

11 CALL CONFERENCE

This unique feature allows to have a 3 party conference
between 3 Extns.

While in conversation with an internal call press flash to hold
a existing call and dial the Extn number whom you want to
invite for conference wait for answer then press flash & 9 to
establish a conference.

12 INTERNAL CALL TRANSFER

Any internal call received/originated at any extension can be
transferred from that extension to any other extension. Flash
& hear transfer mode tone. Dial the extension number to
which you want to transfer the call and wait for the internal
ring tone, you may then hang up.

The call will be transferred automatically. You can wait till the
other extn to take the call and announce the call and then
hang up. Now the called Extn is connected to the waiting
Extn.

NOTE:

To enter into Supervisory Mode (SM) Dial 1* & ppw
By default Personal Password (ppw) is 000

4

Summary of Contents for Eternia 128





















Reviews: