THIS
STATE-OF-THE-ART BALLAST
IS MANUFACTURED
TO PROVIDE TODAY’S SERIOUS GROWER WITH
MAXIMUM FLEXIBILITY & PERFORMANCE
.
Installation/Operating
INSTRUCTIONS
INSIDE:
READ IMPORTANT
INFORMATION BEFORE
FIRING UP YOUR BALLAST
WARRANTY
This unit, when properly used will provide you with years of service. It is
covered under a 3 year warranty (902210 - 400 Watt and 902230 - 1500W/240V have a 2 Year
Warranty). This warranty will be voided if the unit is misused, abused or altered. Warranty
repair or replacement will be at the sole discretion of the manufacturer. Defective units need
to be returned to the place of purchase with proof of purchase/receipt.
This warranty is expressly in lieu of all other warranties, expressed or implied, including the
warranties of merchantability and fi tness for use and of all other obligations or liabilities
on the part of the seller. This warranty shall not apply to this product or any part thereof
which has been damaged by accident, abuse, misuse, modifi cation, negligence, alteration or
misapplication. Manufacturer makes no warranty whatsoever in respect to accessories or parts
not supplied by manufacturer. This warranty shall apply only to the United States, including
Alaska, Hawaii and territories of the United States and Canada.
POSSIBLE CAUSES CORRECTIVE MAINTENANCE
LAMP LOOSE
IN SOCKET
Screw lamp fi rmly into socket. Make sure tab inside the socket makes proper
contact with the base of the lamp. If lamp will not seat properly replace lamp.
INCORRECT
VOLTAGE
Make sure you are using the correct input voltage with ballast. If using
incorrect voltage, disconnect the ballast from the power source immediately.
DEFECTIVE
OR IMPROPER
WIRING
Examine wiring to ensure it agrees with wiring diagrams on ballast label.
Check connections to see that they are secure. If wiring a 240V ballast,
DO NOT use a neutral. The correct wiring is two hot wires and a ground.
POOR ELECTRICAL
CONNECTIONS
Check wiring and lamp contact with socket. Make sure the lamp cord is
fi rmly seated in output receptacle.
INCORRECT
LAMP
Verify that you are using the proper wattage lamp with ballast.
DO NOT use a lamp manufactured according to European or Asian
specifi cations as they will not provide consistent performance.
LAMP
DAMAGE
Investigate possibility of outer bulb damage, particularly where glass
meets base. Lamps may have been twisted to fi rmly into socket.
Look for broken tubes or loose metal parts. Replace lamp.
BREAKER
If lamp will not start, reset the breaker by pressing the white button located
on the input side of the ballast.
TROUBLESHOOTING GUIDE
Follow the troubleshooting tips below. If troubleshooting techniques fail, bring
ballast back to your place of purchase to request warranty service.
RETURNING UNITS
Please contact your retail store for returns.
®
®
Galaxy Grow
Amp Models:
902210 - 400W
902215 - 600W
902220 - 1000W
902225 - 1000W/240V
902230 - 1500W/240V
902235 - 750W
*
* 902210 - 400 Watt and 902230 - 1500W/240V have a 2 Year Warranty
