background image

Gait Up SA 

EPFL Innovation Park, Bat C. CH-1015 Lausanne 

www.gaitup.com 

TVA CHE-145.136.760 

 

Physilog5 user manual v1.2.6 Date: 19.06.2018 
Copyright © 2018, All Rights Reserved -  Gait Up SA. CH-1015 Switzerland 

 

 

 

 

          

    15

 

6.

 

Limited Warranty & Support Policy 

Warranty: 

Gait Up offers 12 months parts and labour on Physilog® starting from the date of delivery. If within one year from the 
date of delivery to the customer the equipment does not comply with the foregoing Limited warranty, Gait Up will at 

Gait Up’s option, repair, replace or refund the purchase price of the defective equipment free of charge to the customer. 

Customers requesting repair, replacement or refund are required to ship, the Physilog® to Gait Up. As a condition of 

this warranty, customers must contact Gait Up’s customer service for instructions on and approval of shipment prior to 

returning any defective Physilog®. The warranty shall not apply to any product or component thereof which has been 

repaired or altered by anyone other than Gait Up in any manner so as, in Gait Up’s judgement, to affect its service ability, 

or any product been subject to alteration, accident, misuse, abuse, neglect or abnormal wear. Gait up warrants solely 
to  the  original  purchaser  (customer).  Only  the  terms  expressed  in  this  warranty  shall  apply  and  no  distributor, 
corporation or individual is authorized to amend, modify or extend this warranty in any way.

 

Gait Up shall have no liability for any consequential, incidental or special damages by reason of any act or omission or 
arising  out  of  or  in  connection  with  the  equipment  or  its  rental,  delivery,  installation,  maintenance,  operation, 
performance or use, including without  limitation any loss of use, lost  revenue, lost  profits or a  cost  associated with 
downtime. The obligations contained in this paragraph continue beyond the term of this limited warranty.

 

Physilog® and Gait Analysis Software are not considered as proper Medical Devices, since they do not support directly 
diagnosis, but they provide data which have to be analysed and approved by medical doctors for them to make their 
diagnosis. Reclamations regarding medical devices will not be considered.

 

 
Support Policy: 

Support does not include:

 

 

support for 3rd party hardware, software, mailing lists or web content

 

 

writing or debugging customer applications and deployments

 

 

detailed explanations of the engineering principles behind our software and hardware

 

 

support for systemic problems beyond the scope of the actual Physilog® and existing systems software (IT issues, 
computer operation)

 

 

support for customers whose conduct fails to meet professional standards

 

 
Occasionally we engage in more interactive support  or  consulting. Interactive support  is a  customer courtesy and is 

provided at Gait Up’s discretion. It does not invalidate the support policy described above. There is no guarantee of 

performance, timeliness, or establishment of a continuous support relationship. Consulting is subject to acceptance of 
a formal statement of work.

 

 

 

Summary of Contents for Physilog 5


















Reviews: