12
3. Setup
3.1 Setting up the Printer
Place the printer on a flat, secure surface, then follow the steps below:
1. Plug the power cord into the AC power cord socket at the rear of the printer. Then, plug the
other side into a properly grounded power outlet.
2. Connect the printer to the computer with the provided USB cable.
3.
Push the power switch on “
-
” side to open the
power of printer.
NOTE:
*
Please switch OFF printer power prior to plugging in the power cord to printer power jack.
*
The interface picture here is for reference only. Please refer to the product specification for the interfaces
availability.
