background image

Foreword 

IDR1000A DC Remote Desk Set User and Installation Manual

 

02/12 2 

Features and Benefits of the IDR1000A DC Remote Desk Set 

Feature Benefit 

Programmable 4-frequency 
function control 

Each frequency/function key can be programmed for one of 56 dc 
currents. 

Intercom 

Desk set users can communicate with each other without tying up 
valuable frequency time. 

Parallel transmit audio 

User can hear audio transmitted by another desk set. 

Selectable DCTOTL 

Indicates transmit by a parallel user, preventing interruptions. 

Selectable off-hook local speaker 

User can choose continuous local speaker when handset is off-hook. 

Front-mounted controls and 
adjustments 

Provides easy-to-operate functions 

Built-in internal microphone 

Allows for handset-free communication. 

Adjustable receive input 
sensitivity and transmit output 
level 

Allows flexibility with different radio systems and user 
environments where radio output levels, line losses, and noise 
factors vary. 

Receive and transmit compression  Automatically normalizes varying input and output levels caused by 

system factors. 

 

FCC Interference Warning 

The FCC requires that manuals pertaining to Class A and Class B computing devices must contain 
warnings about possible interference with local residential radio and TV reception.  This warning reads 
as follows: 

N

OTE

:

  This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment.  This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications.  Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 

Summary of Contents for IDR1000A







































Reviews: