Pub. 42004-284F
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
800-492-1212
Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 530FB Strobe with
Dual Constant-On Lamps
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 530FB Strobe features two constant-on lamps and a flashing strobe with secondary contacts
for auxiliary equipment. The strobe is designed for top-of-pole mounting, wall mounting, or surface
mounting.
The unit is equipped with a ¾-inch NPT female pipe
thread in the base; a pipe nipple or conduit with a
corresponding thread should be used for mounting the
units. For wall or surface mounting, the GAI-Tronics
Model 4115A Mounting Assembly Kit is
recommended.
Installation
Wiring
The Model 530FB Strobe is equipped with seven 15-
foot conductor leads. Refer to Figure 1. The red (+)
and white (–) leads are connected to the 120 V ac
power source. The green lead is the ground wire.
The violet (+) and orange (–) leads are connected to the
emergency telephone to signal the strobe to flash. The
blue and black leads are provided to activate auxiliary
equipment.
Figure 1. Model 530FB Strobe Outline
