Pub. 42004-525A
Model 370-901 SP2 to Page/Party
®
Bridge
Page 14 of 16
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
GUDA Device Administrator Options
The following options are available after clicking the ADMIN button located in the lower right corner of
the GUDA configuration screen area:
Change User Name/Password
—set a new user name and/or password.
Reboot Device
—reboots the SP2 to Page/Party
®
Bridge.
Firmware Update
—opens the following box:
Click the
L
OCATE
F
IRMWARE
U
PDATE
F
ILE
…
button to open a standard Windows
®
O
PEN
dialog
box. Browse to the desired folder and open the desired firmware file, and then click
B
EGIN
U
PDATE
in the
D
EVICE
F
IRMWARE
U
PDATE
box to update the devices firmware.
Enable/Disable
—toggles the isolation of all SP2 and Page/Party
®
audio channels. This toggle is
logically tied to the enable/disable
G
LOBAL
D
IS
press-button switch (
S1
), located on the main PCBA.
Cancel
—close the box and return to the main screen of the GUDA.
Save Configuration Locally
Click the
S
AVE
C
ONFIGURATION
L
OCALLY
button to save a copy of the bridge configuration on
a local disk drive.
N
OTE
:
Only designated values that are not device specific are saved.
A standard Windows
®
S
AVE
A
S
dialog box opens. Save the file in the desired location.
