Pub. 42004-525A
Model 370-901 SP2 to Page/Party
®
Bridge
Page 9 of 16
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
Interface Configuration
The
C
ONFIGURATION
screen appears with the
I
NTERFACE
properties shown:
Configure the following properties for the bridge’s NIC:
Interface Name
—name for the SP2 to
Page/Party
®
Bridge
Address Mode
—select Static or DHCP
Control TTL
—time to live for control
packets
Control Port
—memory address of the
control service
IP Address
—client network address,
leave blank for DHCP clients
Netmask
—subnet mask, leave blank for
DHCP clients
Default Gateway
—IP address of router
to other networks, leave blank for DHCP
clients
Primary DNS
—primary DNS server,
leave blank for DHCP clients
Secondary DNS
—secondary DNS
server, leave blank for DHCP clients
NTP Server
—network time protocol
server IP address, leave blank for DHCP
clients
Allow HW Disable
—
Yes
or
No
Interface Mode
—
Standalone
,
Primary
, or
Backup
Redundancy ID
—unique name for
redundant bridges—must be identical on
the primary and secondary bridges
configured for redundancy
