background image

Pub.  42004-110

GAI-Tronics Corporation P.O. Box 1060, Reading, PA  19607-1060 USA

610-777-1374  

n

  800-492-1212  

n

  Fax:  610-775-6540

G A I - T R O N I C S   C O R P O R A T I O N

Model 13411-001 (8 Ohm) and 13411-002 (16 Ohm)

Replacement Voice Coil/Diaphragm Assemblies

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics.  GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system.  This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The following table presents the driver assemblies covered in this manual.

Model

Description

13314-001

8-ohm, Division II hazardous

13314-002

16-ohm, Division II hazardous

13314-003

70-volt, not UL listed (16-ohm VC)

13315-001

8-ohm, Division I hazardous

13315-002

16-ohm, Division I hazardous

13315-003

70-volt, Division I hazardous (16-ohm VC)

The equipment described herein is listed by Underwriter’s Laboratories (with the exception of the
13314-003) for use in the hazardous areas described.  This listing is contingent upon several points:

 

Equipment is installed in accordance with the National Electrical Code and/or any special
instructions.

 

No unauthorized mechanical or electrical modifications are made.

 

The ac input power is disconnected from all associated equipment before removing equipment
covers.

 

Replacement parts are equivalent to the original.

 

All cover bolts and/or fittings removed for maintenance are replaced before reconnecting the ac
power.

Voice Coil Replacement for 13314 Series Drivers

1. 

 

Remove the 3 retaining screws from the back cover, and open the driver housing.

2. 

 

Firmly grasp wires leading to the connector tabs on the voice coil frame, and pull the leads straight
out.

Reviews: