Gaggia Milano La Reale, Installation And Use Manual

Page: 10 / 88

1.7 EC MARKING
The machine has been designed and built in
compliance with the following directives:
- The Machinery Directive 2006/42/EC
- The Low Voltage Directive 2014/35/EU
- The Electromagnetic Compatibility Directive
(EMC) 2014/30/EU
- The Pressure Equipment Directive (PED)
2014/68/EU
The machine is equipped with a special data
plate showing indelible information relating to
its EC marking, including its model and serial
number.
The data plate also indicates the characteristics
of its electrical power supply and its water/steam
circuit.
PROHIBITION
It is prohibited to remove
the EC marking plate and/or
to replace it with other data
plates.
Warning
The Customer must promptly
notify SaGa Coffee S.p.A
if the EC marking plate is
accidentally damaged or
detached from the machine,
or if the manufacturer's seal
that secures the plate to
the machine is accidentally
removed.
1.8 LIMITATIONS OF LIABILIT Y
SaGa Coffee S.p.A.shall bear no responsibility
for any direct or indirect personal injuries or
property damage resulting from:
- improper machine use;
- the use of the machine by unqualified
personnel;
- inadequate machine maintenance;
- the use of non-original spare parts or parts
not expressly authorised by the manufacturer;
- unforeseeable events;
- the failure to observe the safety requirements
contained in this Manual.
The indications contained in this Manual must
be scrupulously respected, and the SaGa
Coffee S.p.A. Technical Support service must be
contacted for any doubts that may arise.
ENG
4 GENERAL INFORMATION