33
Home Connect ™
en-us
Note:
If a connection could not be established,
“§§
(fault) will appear on the display. Check whether your
smartphone or tablet PC is in range of your home
network and whether it is connected to it. Try connecting
to the Home Connect app again.
Activating/deactivating Wi-Fi
You can switch the Home Connect function on your
appliance on or off permanently at any time.
1.
Switch the appliance on.
2.
Press and hold
ý
(Remote Start)
for at least
3 seconds.
‘ž£
(connect automatically) will appear on the
display.
3.
Turn the program selector to position 4.
’©Ÿ
(WiFi function) will appear on the display.
4.
Press
A
(Start/Pause) .
If
©Ÿ
(switched on) appears on the display, the WiFi
function on the appliance has been activated. If
©””
(switched off) appears on the display, the WiFi
function is not active.
5.
Press
ý
(Remote Start)
briefly to exit the Home
Connect settings.
Notes
▯
If you connect to your home network, Wi-Fi is
activated automatically.
▯
If Wi-Fi is activated, the appliance will not switch off
automatically.
▯
If Wi-Fi is switched off on the appliance, it is not
possible to use the Home Connect app to start or
control the appliance remotely.
▯
If Wi-Fi is switched off and your appliance was
previously connected to your home network, this
connection will be re-established automatically when
Wi-Fi is switched back on.
▯
If you activate this function, the energy consumption
increases in comparison to the values specified in the
consumption value table.
Resetting your network settings
You can clear the network settings and break the
connection to your smartphone or tablet PC by resetting
the network settings.
1.
Switch the appliance on.
2.
Press and hold
ý
(Remote Start)
for at least
3 seconds.
‘ž£
(connect automatically) will appear on the
display.
3.
Turn the program selector to position 5.
§“à
(reset network settings) will appear on the
display.
4.
Press
A
(Start/Pause) .
¢“à
(yes) will appear on the display.
