10
en-us
Introduction to your new washer
Introduction to your new washer
Introduction to your new washer
9
WARNING
Risk of fire, electric shock or injury!
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY
INSTRUCTIONS of this manual before installing or
operating this appliance.
Standard features and helpful
information
Thank you for choosing Gaggenau® for your laundry
appliance needs.
Please read and follow the use and care, important safety
instructions and troubleshooting information contained in
this manual. Please retain this manual for future
reference.
Standard features
▯
17.6 lb (8 kg) large drum capacity (for regular cotton
loads).
▯
Low washing and spinning noise levels.
▯
Large door opening featuring 180º opening angle.
Quality tested
Every Gaggenau® washer is thoroughly tested before
leaving the factory. As a result, a small amount of residual
water may remain in the washer drum. We recommend
running the
DRUM CLEAN
cycle to remove this water prior
to washing your first load of laundry.
Website
Visit our website at www.gaggenau.com/us for more
information and to view a selection of our products.
About this manual
These operating and installation instructions may apply to
more than one model of washer. Illustrations used may
show details that differ from your particular model.
Read your user manual. It contains valuable information
about safety, installation and operation of your new
appliance.
This can save you time, make it easier to correctly install
and use your washer, and improve your overall
satisfaction with your new appliance.
Special features
▯
Load adjust matches the water and power
consumption to each program according to the
amount of laundry sensed in the drum and the type of
fabric.
The load adjust function runs automatically to keep
energy and water consumption as low as possible.
The water level sensor ensures the water level is
correct for the laundry and the program selected.
▯
The automatic unbalanced load detection system
spins the laundry several times to ensure even
distribution.
If the laundry is not evenly distributed, the spin speed
is reduced, or the laundry may not be spun for reasons
of safety.
In the Wool program, the spin cycle is attempted only
twice in order to prevent felting.
