13
Installation Procedure
en-us
7.
Put the filter cover on.
8.
Only for flush-mounted installation: Before joining, make
sure to perform a function test!
Grout the surrounding
gap with a suitable temperature-resistant silicone
adhesive (e.g., OTTOSEAL
®
S 70). Smooth the joint
seal with a smoothing agent recommended by the
manufacturer. Follow the instructions for the silicone
adhesive. Only start up the appliance after the
silicone adhesive is completely dry (at least 24 hours,
depending on the room temperature).
9
CAUTION
Unsuitable silicone adhesive causes permanent
discoloration to natural stone worktops.
