11
Installation Procedure
en-us
7.
After installing, check that all plug connections fit
correctly.
8.
After installing all the cables, secure them to the
retaining plate by bending the tab down
(E)
.
Install Appliance
9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Note:
Observe the installation sequence. First fit the
downdraft ventilation in the cut-out on the worktop. Then
install the other appliances.
1.
Use four nuts to screw the exhaust-air elbow tightly to
the appliance.
2.
Insert the downdraft ventilation into the cut-out on the
worktop.
$
%
&
'
(
)
