background image

en 

Accessories

10

6.4 Cooking zone

Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking.

Area

Cooking zone type

​⁠

Single cooking zone

​⁠

Flexible cooking zone 
→ 

"Flex Zone", Page 13

​⁠  ​⁠

FlexPlus cooking zone 
→ 

"FlexPlus Zone", Page 14

6.5 Residual heat indicator

The hob has a residual heat indicator for each cooking
zone. The residual heat indicator indicates that a cook-
ing zone is still hot. Do not touch the cooking zone
while the residual heat indicator is still lit or immediately
after the residual heat indicator goes out.
Depending on the amount of residual heat, the display
shows the following symbols:

¡

​⁠: High temperature

¡

​⁠: Low temperature

The illuminated ring on the control knob flashes or-
anges.
If you remove the cookware from the cooking zone dur-
ing cooking, the power level indicator flashes and the
illuminated ring on the control knob lights up orange.
If you switch off the cooking zone, the residual heat in-
dicator lights up and the illuminated ring on the control
knob flashes. Even after the hob has been switched off,
the residual heat indicator will stay lit for as long as the
cooking zone remains warm.

7  Accessories

You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. → 

Page 31

You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.gaggenau.com

Accessories

Use

Teppan yaki made from
multi-layer material
CA051300

Recommended accessor-
ies for the frying sensor.
For the flexible cooking
zone only.

Griddle plate made from
cast aluminium
CA052300

Recommended accessor-
ies for the frying sensor.
For the flexible cooking
zone only.

8  Before using for the first time

Observe the following recommendations.

8.1 Initial cleaning

Remove any leftover packaging from the hob surface
and wipe the surface with a damp cloth. You can find a
list of recommended detergents on the official website
www.gaggenau.com.
More information on care and cleaning. → 

Page 27

8.2 Cooking with induction

In comparison to conventional hobs, induction techno-
logy brings with it a series of changes and has a num-
ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean-
ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.

8.3 Cookware

You can find a list of recommended cookware on the
official website www.gaggenau.com.
Further information on suitable cookware. → 

Page 6

8.4 Setting up Home Connect

Set up Home Connect. 
→ 

"Home Connect ", Page 20

8.5 Colour shades of the illuminated rings

The illuminated ring on the control knob lights up or-
ange during operation. You can choose between two
colour shades.
You can change the colour shades so that all of the il-
luminated rings across several appliances light up in
the same shade. 
→ 

"Changing the colour of the illuminated ring",

Page 12

Summary of Contents for VI482115













































Reviews: