9
Installation Procedure
Installing the heat shield
9
CAUTION
Sharp edges. Use protective gloves when
installing the plate.
For safety reasons, the heat shield must be properly
installed. This prevents components from overheating
as a result of the recirculation of hot air from the
cooktop.
The heat shield is the same width as the cooktop. For
shipping, it is screwed to the burner box.
After unpacking the cooktop, unscrew the heat shield.
The heat shield will be able to rotate freely, as shown
in the illustration.
Installation of control console
Note:
Only install the appliance in conjunction with
the corresponding control console.
1
Remove the packaging of the control knobs and
the protective film from the light rings.
2
Hold the retaining plate against the front panel
from behind. Stick the control knobs into the
holes from the front and screw it tight from
behind with the nuts. Make sure that the control
knobs are correctly arranged.
3
Screw the control console tight to the retaining
plate using the nuts included.
Summary of Contents for VI 491 610
Page 35: ......
