14
en
Getting to know your appliance
FlexPlus cooking zone
The hob has two FlexPlus cooking zones which are
located between the two flexible cooking zones and
which switch on in conjunction with the right- or left-
hand flexible cooking zone. This means that larger
cooking vessels can be used and better cooking results
can be achieved.
Each FlexPlus cooking zone always switches on in
conjunction with the right- or left-hand flexible cooking
zone. It is not possible to switch them on independently
of one another.
Notes regarding cookware
The cookware should be positioned centrally for good
thermal detection and distribution.
The cookware should cover the side hotplate and the
FlexPlus cooking zone.
Depending on the size of the cookware, the flexible
cooking zone can be activated as two independent
hotplates or as one hotplate:
Activation
1
Set down the cookware on the hotplate and make
sure that it also covers the FlexPlus cooking zone.
2
Select the hotplate and the required heat setting.
The hotplate and FlexPlus cooking zone indicators
light up.
The flexible cooking zone is activated.
Deactivating
Remove the cookware from the hotplate. The displays
go out.
This deactivates the FlexPlus cooking zone.
Set down the cookware
Elongated cookware:
Activate the flexible cooking zone
as two independent hotplates or
as one hotplate.
Large round cookware:
Activate the flexible cooking zone
as a single hotplate.
The cookware must not cover
both FlexPlus cooking zones at
the same time.
