Gaggenau VI 482 103, Instruction Manual

Page: 22 / 36

22
en
Home Connect
6 Press the
t
symbol again to call up the basic
settings.
™‚
and
‹¯
will light up by default on the displays.
7 Touch the
t
symbol repeatedly until the required
function is displayed.
8 Then use the
@
and
A
symbols to select the
required setting.
9 Touch the
t
symbol for at least 4 seconds.
The settings have been saved.
Exiting the basic settings menu
1 Turn the control knob anti-clockwise to position
Ž
.
2 Turn the control knob clockwise to position 1.
3 Turn the control knob anti-clockwise to position 0.
The
t
symbol and the illuminated ring around the
control knob will go out.
o
Home Connect
Home Connect
This hob is Wi-Fi-enabled; settings can be sent to the
hob via a mobile device.
If the hob is not connected to the home network, the
appliance functions in the same way as a hob with no
network connection. The hob can always be operated
via the control knob.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
– Hobs are not designed to be used unattended – you
must always keep an eye on the cooking process.
– Ensure that you follow the safety instructions in this
instruction manual and that these are also observed
when operating the appliance via the Home
Connect app. You must also follow the instructions
in the Home Connect app.
~
"Important safety
information" on page 5
– You can use the Home Connect app to change the
basic settings for your hob. Remote start or setting
a power level is not possible.
– Operating directly from the appliance always takes
priority. It is not possible to operate the appliance
using the Home Connect app during this time.
Home Connect settings menu
To connect your appliance to Home Connect or run
WiFi connection settings, you must open the Home
Connect settings menu on your appliance.
Note: It is important to carry out the following operating
steps without interruption, one after the other.
1 Push in any control knob and turn one notch anti-
clockwise to the
Ž
position. Keep the control knob
pressed in.
2 Turn the control knob two notches clockwise to
position
ª
or
¹
. Keep the control knob pressed
in.
3 Turn the control knob one notch anti-clockwise to
position
0 .