Gaggenau VI 482 103, Instruction Manual

Page: 14 / 36

14
en
FlexPlus cooking zone
As a single hotplate
Using the entire cooking zone by connecting both
hotplates.
Linking the two hotplates
1 Set down the cookware. Turn one of the control
knobs to position
ª
.
2 Use the other control knob to select the heat
setting. The
ª
indicator will be lit. The heat setting
will be lit on the displays for the two hotplates.
The Flex cooking zone has now been activated.
Changing the heat setting
To alter the heat setting, use the same control knob you
used to select the original heat setting.
Adding new cookware
Set down the new cookware. Turn the control knob that
was used to select the Flex cooking zone to position
0
and then back to position
ª
.
The cookware will be detected and the heat setting that
was previously selected will be retained.
Note: If the cookware is moved to the hotplate being
used or lifted up, the hotplate begins an automatic
search and the heat setting selected previously is
retained.
Unlinking the two hotplates
Turn the control knob that was used to select the Flex
cooking zone to position 0. The
«
indicator will be lit.
The Flex cooking zone has now been deactivated. The
two hotplates will now function independently.
Note: If you switch the hob off and then subsequently
switch it on again, the flexible cooking zone is converted
back to two independent hotplates.
}
FlexPlus cooking zone
FlexPlus cooking zone
The hob has two FlexPlus cooking zones which are
located between the two flexible cooking zones and
which switch on in conjunction with the right- or left-
hand flexible cooking zone. This means that larger
cooking vessels can be used and better cooking results
can be achieved.
Each FlexPlus cooking zone always switches on in
conjunction with the right- or left-hand flexible cooking
zone. It is not possible to switch them on independently
of one another.
Notes regarding cookware
The cookware should be positioned centrally for good
thermal detection and distribution.
The cookware should cover the side hotplate and the
FlexPlus cooking zone.
Depending on the size of the cookware, the flexible
cooking zone can be activated as two independent
hotplates or as one hotplate:
Set down the cookware
Oblong cookware:
Activate the flexible cooking zone
as two independent cooking
zones.
Oblong cookware:
Activate the flexible cooking zone
as a single cooking zone.
The cookware must not cover
both FlexPlus cooking zones at
the same time.
Do not use round cookware that
does not fully cover the FlexPlus
cooking zone.