26
en
Connecting an extractor hood
e
Connecting an extractor hood
Connecting an extractor hood
You can connect this appliance to a suitable extractor
hood and then control the functions of the hood via your
hob.
There are two options for connecting the appliances to
each other:
Connecting appliances via the home network
If both appliances are compatible with Home Connect,
you can connect them via the home network. The
appliances are connected via the Home Connect app.
You can also use both the hood control and Home
Connect.
Connecting appliances directly
You can connect both appliances directly, without
connecting to a home network. It is not possible to use
the Home Connect functions. The appliance works as a
hob with no network connection.
Notes
–
Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the hob.
–
Using the controls on the extractor hood always
takes priority. It is not possible to use the hood
controls on the hob during this time.
–
In networked standby mode, your appliance
requires a maximum of 2 W.
Connecting via the home network
Ensure that both appliances are connected to the Home
Connect app.
Select the required hob in the Home Connect app. In
the settings, you can search for the required extractor
hood and connect to the hob.
You can connect several hobs that are compatible with
Home Connect to an extractor hood:
1
Connect the first hob to the extractor hood.
2
Switch off the Wi-Fi on the hob.
3
Connect the second hob to the extractor hood.
4
Switch the Wi-Fi on the first hob back on again.
Connecting directly
Note:
If you connect your hob directly to the extractor
hood, it can no longer be connected to your home
network as well and you can no longer use Home
Connect.
1
Push in one of the control knobs and turn it anti-
clockwise to position
Ž
.
2
Turn the control knob clockwise to position
ª
or
¹
.
3
Turn the control knob anti-clockwise to position
0
.
The illuminated ring on the control knob lights up
blue.
4
Turn the control knob clockwise to position
ª
or
¹
.
On the control panel,
••’
and
’‹¯‚
are
displayed alternately. The illuminated ring on the
control knob flashes blue. The hob is now ready for
registration in the home network.
5
You have two minutes to initiate the connection on
the extractor hood. For more information, refer to
the section entitled "Connecting to the hob" in the
instruction manual for your extractor hood.
Summary of Contents for VI 462 103
Page 1: ...Instruction manual VI 462 103 VI 462 113 Hob...
Page 2: ...2...
Page 34: ......
Page 35: ......
