Gaggenau VI 414 613, Use And Care Manual

Page: 30 / 40

30
en-us
Connecting an extractor hood
Connecting via your home network
Ensure that both appliances are connected to the Home
Connect app.
Select the required cooktop in the Home Connect app. In
the settings, you can search for the required extractor
hood and connect to the cooktop.
You can connect several cooktops that are compatible
with Home Connect to an extractor hood:
1.
Connect the first cooktop to the extractor hood.
2.
Switch off the Wi-Fi on the cooktop.
3.
Connect the second cooktop to the extractor hood.
4.
Switch the Wi-Fi on the first cooktop back on again.
Connecting Directly
Note: If you connect your cooktop directly to the
extractor hood, it cannot be connected to your home
network as well and you will not be able to use Home
Connect.
1.
Carry out the following operating steps one after the
other without interruption.
2.
Push in one of the control knobs and turn it anti-
clockwise to the
Ž
position.
3.
Turn the control knob clockwise to position
ª
or
¹
.
4.
Turn the control knob anti-clockwise to position 0 .
The illuminated ring around the control knob lights up
blue.
5.
Turn the control knob clockwise to position
ª
or
¹
.
On the control panel,
••’
and
’‹¯‚
are displayed
alternately. The illuminated ring on the control knob
flashes blue. The cooktop is now ready for registration
in the home network.
6.
You have two minutes to initiate the connection on the
extractor hood. For more information, refer to the
section entitled "Connecting to the cooktop" in the
instruction manual for your extractor hood.
The connection process may take a few minutes. The
cooktop is connected to the extractor hood once
˜‘‚
lights up on the control panel and the illuminated ring
on the control knob lights up green. The
Ö
symbol is
displayed on the cooktop's control panel.
Saving the connection and exiting the settings menu
1.
Carry out the following operating steps one after the
other without interruption.
2.
Push in the control knob and turn it anti-clockwise to
the
Ž
position.
3.
Turn the control knob clockwise to position
ª
or
¹
.
4.
Turn the control knob anti-clockwise to position 0 .
The illuminated ring on the control knob goes out.
Controlling the Hood via the Cooktop
In the Home Connect app, you can adjust the behavior of
your extractor hood depending on the switch-on/off of
the cooktop or individual cooking zones.