Gaggenau VI 414 613, Use And Care Manual

Page: 26 / 40

26
en-us
Home Connect
Note: If you select settings in the Home Connect settings
menu, you will need to exit the Home Connect menu in
the same way to save the settings.
Displays on the illuminated ring on the control knob
▯
While you are in the Home Connect menu, the
illuminated ring on the control knob lights up blue.
▯
While the appliance is establishing a connection to
the home network, the illuminated ring on the control
knob flashes blue.
▯
If the appliance has established a connection to the
home network, the illuminated ring on the control
knob lights up green.
▯
If the appliance was not able to establish a connection
to the home network, the illuminated ring on the
control knob lights up red.
Setting Up
To implement settings via Home Connect, you must have
installed and set up the Home Connect app on your
mobile device.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
Setting up the Home Connect app
Note: You require a mobile device with the latest version
of the relevant operating system.
1.
On your mobile device, go to the App Store (Apple
devices) or to the Google Play Store (Android
devices).
2.
Enter "Home Connect" in the search field.
3.
Select the Home Connect app and install it on your
mobile device.
4.
Start the app and create your Home Connect login
details. The app will guide you through the
registration process. Make a note of your e-mail
address and password.
Connecting the appliance to your home network (Wi-Fi)
1.
Carry out the following operating steps one after the
other without interruption.
2.
Push in any control knob and turn it anti-clockwise to
the
Ž
position.
3.
Turn the control knob clockwise to position
ª
or
¹
.
4.
Turn the control knob anti-clockwise to position 0 .
The illuminated ring around the control knob lights up
blue.
5.
Turn the control knob clockwise to position
ª
or
¹
.
On the control panel,
••’
and
’‹¯‚
are displayed
alternately. The illuminated ring on the control knob
flashes blue. The cooktop is now ready for registration
in the home network.
Automatic Registration in the Home Network
You require a router that has WPS functionality. You will
find information about this in the manual for your router.
You need to be able to access your router.
If you cannot access it, follow the steps under "Manually
logging into your home network".
1.
Press the WPS button on the router within the next
two minutes.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.