Gaggenau VI 414 613, Use And Care Manual

Page: 25 / 40

25
Home Connect
en-us
5.
Touch the
t
symbol.
The displays show the product information.
6.
Press the
t
symbol again to call up the basic
settings.
In the displays,
™‚
and
‹¯
light up as a presetting.
7.
Touch the
t
symbol repeatedly until the required
function is displayed.
8.
Then use the
@
and
A
symbols to select the required
setting.
9.
Touch the
t
symbol for at least 4 seconds.
The settings have been saved.
Exiting the Basic Settings Menu
1.
Turn the control knob anti-clockwise to the
Ž
position.
2.
Turn the control knob clockwise to position 1.
3.
Turn the control knob anti-clockwise to position 0.
The
t
symbol and the illuminated ring around the control
knob will go out.
o
Home Connect
Home Connect
This appliance is Wi-Fi enabled and settings can be sent
to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a cooktop
with no network connection. The cooktop can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
▯
Cooktops are not designed to be used unattended –
you must always keep an eye on the cooking process.
▯
Ensure that you follow the safety instructions in this
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. Follow the instructions in the Home Connect
app.
~
"IMPORTANT SAFETY INSTRUCTIONS"
on page 5
▯
Using the Home Connect app, you can send settings
to your appliance, and you must then confirm these on
the appliance. It is not possible to operate the
appliance while you are away from home.
▯
If the appliance is being operated by the controls on
the appliance itself, this mode of operation always has
priority. It is not possible to operate the appliance
using the Home Connect app during this time.
Open or close the Home Connect
settings menu
To connect your appliance to Home Connect or establish
the connection to your home network, you will need to
open the Home Connect settings menu on your
appliance.
Note: It is important to carry out the following operating
steps without interruption, one after the other.
1.
Push in any control knob and turn one notch anti-
clockwise to the
Ž
position. Keep the control knob
pressed in.
2.
Turn the control knob two notches clockwise to
position
ª
or
¹
. Keep the control knob pressed in.
3.
Turn the control knob one notch anti-clockwise to
position
0 .
Product information Display
Customer service index (CSI)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
ܠ