12
en-us
Getting to know your appliance
Getting to know your appliance
Getting to know your appliance
Gas cooktop
Control knob
The markings by each of the control knobs show which
burner they operate and the heat setting (from 1 to 12 or
Simmer setting
Â
).
Display on the illuminated ring
Each control knob is encircled by an illuminated ring with
various display functions.
Individual parts of the burner
Ensure that the individual parts of the burner are fitted in
the correct position and are straight; otherwise, this may
result in ignition problems or problems during operation.
Ensure that the burner head and burner ring fit so that
the locking catches on the bottom of the burner snap into
the appropriate recesses. The direction of burner head
and burner ring doesn't matter.
Note:
If the burner parts are fitted at an angle, the
appliance will not work.
3
#
+
(
Ventilation openings (underneath pan support)
0
Pan support
8
Standard-output burner 2.0 kW 7,000 BTU/hr
@
High-output burner 4.0 kW 13,500 BTU/hr
H
Control knob, front burner
P
Control knob, rear burner
Display screen
Meaning
Û
Off
Appliance OFF
Ú
Lit orange
Appliance ON
ˆ
Flashing orange
Appliance OFF
Residual heat indicator
ˆ
Flashing orange and
white alternately
Safety shut-off, power fail-
ure
ˆ
Flashing yellow and
magenta alternately
Appliance fault
Call Customer Service
Ú
Lights up green for a
few seconds, then turns
yellow
Appliance initialized,
only after initial connec-
tion or power failure
