16
en
Operating the appliance
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1
Press
à
button to open the main menu.
2
Press
B
button to move to the
Basic settings
menu
item.
3
Press
™
button to open the menu item.
4
Press
C
button to move to the
Signal tone volume
menu item.
5
Press
%
button to open the menu item.
6
Press
B
C
buttons to select the required setting.
7
Press
™
button.
The setting is saved.
8
Press
'
button to exit the menu.
Switching the water filter counter on
and off
If you have replaced the particle filter with a water filter,
switch the water filter counter on. This will remind you to
replace the water filter in good time.
1
Press
à
button to open the main menu.
2
Use
B
button to move to the
Basic settings
menu.
3
Press
™
button.
4
Use
C
button to move to the menu item
Water filter
counter
.
5
To change the setting, press
%
button.
6
Select the required setting.
7
Confirm the selection by pressing
™
button.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly
darker when it is closed.
Switching dimming on or off when opening and
closing the door
1
Press
à
button to open the main menu.
2
Press
B
button to move to the menu item
Basic
settings
.
3
Press
™
button.
4
Press
C
button to move to the menu item
Dimming
when opening and closing the door
.
5
Press
%
button.
6
Press
C
button to move to the menu item
On
or
Off
.Press
™
button to confirm.
Ice and water dispenser light
Use this function to set how long the light will illuminate
the ice and water dispenser.
Setting ice and water dispenser light
1
Press
à
button to open the main menu.
2
Press
B
button to move to the menu item
Basic
settings
.
3
Press
™
button to open the menu item.
4
Use
C
button to move to the menu item
Ice and
water dispenser light
.
5
Press
%
button to open the menu item.
6
Press
C
button to select the required duration.
7
Press
™
button.
The setting is saved.
8
Press
'
button to exit the menu.
Ice and water dispenser proximity
sensor
When the proximity sensor is switched on, the ice and
water dispenser light switches on automatically as soon
as a glass is held underneath.
Switching proximity sensor on or off
1
Press
à
button to open the main menu.
2
Press
B
button to move to the menu item
Basic
settings
.
3
Press
™
button to open the menu item.
4
Press
C
button to move to the menu item
Motion
sensor
.
5
Press
%
button to open the menu item.
6
Press
B
C
buttons to move to the required setting.
7
Press
™
button.
The setting is saved.
8
Press
'
button to exit the menu.
