Installation and connection
en
11
Niche width
An inside niche width of at least
600 mm is required for the appli-
ance.
Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150 mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
WARNING
Risk of electric shock!
Liquid in the control elements may be
dangerous.
▶
Always install the enclosed niche
cover in accordance with the en-
closed installation instructions.
▶
Install the appliance in accordance
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
1.
Remove the informative material.
2.
Remove the protective foil and
transit bolts, e.g. remove the ad-
hesive strips and carton.
3.
Clean the appliance for the first
time. →
4.5 Connecting the appliance
to the electricity supply
1.
Insert the non-heating appliance
plug of the power cable into the
appliance.
2.
Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate.
4
,
3.
Check the mains plug is inserted
properly.
a
The temperature display shows an
animation and the control panel is
locked.
a
The appliance is ready to use once
the animation has ended and an
LED lights up for the temperature
display.
