28
Removing the container
Pull out the container all the way and lift to detach it.
To insert the container, place on the telescopic rails
and push into the appliance. Attach the container by
pressing it down.
Taking out the humidity filter
The humidity filter over the humidity container can be
taken out for cleaning. To do this, first take out
the humidity container and pull out the humidity filter.
Lift off the filter cover and take out the filter. Clean
in lukewarm water, leave to dry and re-assemble.
Installing extension rails
1.
To remove the extension rails, bend slightly at the
front in the direction of the arrow.
2.
Lift extension rail and detach from the mounting.
3.
To install the extension rail, insert into the rear
opening.
4.
Insert extension rail into the front opening and
engage downwards.
Tips for saving energy
▯
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
▯
Allow warm food and drinks to cool down before
placing in the appliance!
▯
When thawing frozen products, place them
in the refrigerator. Use the coldness of the frozen
food to cool food.
▯
Open the appliance as briefly as possible.
▯
Occasionally clean the rear of the appliance
with a vacuum cleaner or paint brush to prevent
an increased power consumption.
2
4
3
1
