27
Cleaning the appliance
ã
Caution
▯
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
▯
Do not use scouring or abrasive sponges.
The metallic surfaces could corrode.
▯
Never clean shelves and containers
in the dishwasher. The parts may become
deformed!
Proceed as follows:
1.
Before cleaning: Switch the appliance off.
2.
Pull out the mains plug or switch off the fuse.
3.
Clean the appliance with a soft cloth, lukewarm
water and a little pH neutral washing-up liquid.
The rinsing water must not run into the light.
4.
Wipe the door seal with clear water only and then
wipe dry thoroughly.
5.
Rinsing water must not run through the drainage
hole into the evaporation area.
6.
After cleaning reconnect and switch
the appliance back on.
Notes
▯
Regularly clean the condensation channel
and drainage hole with a cotton bud or similar
implement to ensure that the condensation can
drain.
▯
After cleaning, the stopper must be re-inserted
into the drainage hole of the refrigerator
compartment for functional reasons.
Interior fittings
All variable parts of the appliance can be taken out for
cleaning.
Take out glass shelves
Lift the glass shelves, pull forwards, lower and swing
out to the side.
Take out shelves in the door
Lift shelves upwards and take out.