Gaggenau EB333111, User Manual And Installation Instructions

Page: 15 / 56

Long-term timer
en
15
Delaying the cooking time end
Requirements
¡
The food is in the cooking compartment.
¡
You have set the type of heating, temperature and
cooking time.
1.
Press ⁠.
2.
Use to select the "Cooking time end" function.
3.
Use the rotary selector to set the required cooking
time end.
If flashes, set the cooking time first.
4.
Press to start.
a
The appliance switches to standby.
a
The display shows the operating mode, temperat-
ure, cooking time and cooking time end.
a
The appliance starts at the calculated time and auto-
matically switches off once the cooking time has
elapsed.
a
After the cooking time has elapsed, flashes and a
signal tone sounds.
5.
Press , open the appliance door or set the func-
tion selector to ⁠.
a
The signal tone stops.
Changing the cooking time end
1.
Press ⁠.
2.
Use to select the "Cooking time end" function.
3.
Use the rotary selector to set the required cooking-
time end.
4.
Press to start.
Cancelling the entire procedure
▶
Turn the function selector to ⁠.
9 Long-term timer
With the appliance in hot air mode, this function keeps
the temperature between 50 °C and 230 °C.
You can keep food warm for up to 74 hours without
having to switch the appliance on or off.
Bear in mind that food which spoils easily should not
be left in the appliance for too long.
9.1 Starting the long-term timer
Requirement:
The long-term timer is set to "Available"
in the basic settings → Page 24 .
1.
Turn the function selector to ⁠.
2.
Press ⁠.
a The display shows the default value 24h at 85 °C.
3.
Press and use the rotary selector to set the re-
quired cooking time.
4.
Press and use the rotary selector to set the re-
quired cooking time end.
5.
Press , use the rotary selector to set the required
switch-off date, and press to confirm.
6.
Use the rotary selector to set the desired temperat-
ure.
7.
Press to start.
a The appliance starts the long-term timer.
a
The display shows and the temperature.
a The interior lighting and the display lighting are
switched off.
a The control panel is locked.
a
If you touch the control panel, no signal tone
sounds.
a
Once the time has elapsed, the appliance no longer
heats up and the display goes out.
8.
Turn the function selector to ⁠.
9.2 Switching off the long-term timer
▶
Turn the function selector to ⁠.
10 Childproof lock
Activate the childproof lock so that children cannot ac-
cidentally switch the appliance on or change the set-
tings.
If the childproof lock is switched on and the power
fails, the childproof lock can be deactivated when the
power comes back on.
10.1 Activating the childproof lock
Requirements
¡
You can set the childproof lock to "available" in the
basic settings →
Page 24 .
¡
The function selector is set to ⁠.
▶
Press and hold for approx. 6 seconds.
a
The display shows the standby screen and ⁠.
a
The childproof lock is activated.
10.2 Deactivating the childproof lock
Requirement:
The function selector is set to ⁠.
1. Press and hold for approx. 6 seconds.
a
The childproof lock is deactivated.
2. Set the appliance as normal.