16
Additional options
Additional options
* depending on model
Additional options can be set with the buttons
H
.
Express Wash/ Speed Perfect (VarioSpeed)
Ÿ
Express Wash/
Speed Perfect/ (VarioSpeed) *
This function can reduce the running time by approx.
20% to 50% depending on the selected rinse
programme. The change in the running time is
indicated on the digital display
)"
. To obtain
optimum cleaning results at a reduced running time,
water and energy consumption are increased.
Half load
§
Half load *
If you have only a few items to wash (e.g. glasses,
cups, plates), you can switch to “half load”. This will
save water, energy and time. It is recommended to put
a little less detergent in the detergent dispenser than
for a full load.
·
Hygiene *
Hygiene
The temperature is increased during the cleaning
process. This increases the hygiene status. This
additional option is ideal for cleaning e.g. chopping
boards and baby bottles.
Ï
Intensive zone *
Intensive zone
Perfect for a mixed load. You can wash very soiled
pots and pans in the lower basket together with
normally soiled utensils in the upper basket. The spray
pressure in the lower basket is intensified, the rinsing
temperature is increased slightly.
¿
Extra drying *
Extra drying
An increased temperature during the final rinse and
an extended drying phase ensure that even plastic
parts dry better. There is a slight increase in the
energy consumption.
Operating the appliance
Programme data
The programme data (consumption values) can be
found in the summary of instructions. They refer to
normal conditions and the water hardness set value
•
:
‹…
. Different influencing factors such as e.g. water
temperature or line pressure may result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The Aqua sensor is used according to the programme.
If the Aqua sensor is active, “clean” rinsing water can
be transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained and is
replaced with fresh water. In the automatic
programmes the temperature and running time can
also be adjusted to the degree of soiling.
Switching on the appliance
1
Turn on the tap fully.
2
Switch on ON/OFF switch
(
.
The display of the last selected programme
flashes. This programme remains selected if no
other programme button
0
is pressed. The
expected programme duration flashes on the
digital display
)"
.
3
Press the START button
P
.
The programme starts running.
Remaining running time display
When the programme is selected, the remaining
running time of the programme is indicated on the
digital display
)"
.
The running time is determined during the programme
by the water temperature, the number of utensils as
well as the degree of soiling and may vary (depending
on the selected programme).