Gaggenau DF270100, User Manual

Page: 39 / 68

Basic settings
en
39
Basic settings
Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
Time setting 00:00 - 24:00 Set the current time.
The setting depends on the time format selected.
Time format 12 h
24 h
1
Set the time format.
Time display In hours
Time
1
Set the time display for the end of the pro-
gramme.
"Finish in" shows the remaining time the pro-
gramme has to run, e.g. 3h 25min.
"Finish at" shows the time when the programme
will end, e.g. 15:20 hours.
Sprache/Language See selection on the
appliance. Select the menu language.
Water hardness 0 - 62
16 - 20 medium
1
Set the water hardness.
→
"Overview of water hardness settings",
Page 28
Rinse aid dispenser 0 - 6
5
1
Set or switch off the amount of rinse aid to be dis-
pensed.
→
"Setting the amount of rinse aid", Page 31
Sensor setting Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
→
"Sensors", Page 12
Extra Dry on
off
1
Switch "Extra Dry" on or off for each operation.
The temperature is increased during the final
rinse for a better drying result. This may increase
the running time slightly.
Please take care with delicate tableware.
Water connection Cold water
1
Hot water
Set cold water or hot water connection.
Only set the appliance to hot water if this can be
prepared with little energy and a suitable installa-
tion is available, e.g. solar heating system with
circulation line. The water temperature should be
at least 40 °C and max. 60 °C.
1
Factory setting (may vary according to model)