en
Cleaning and maintenance
34
Terminating the programme (Reset)
Terminating the programme
1.
Open the door.
2.
Press the START button
)2
and hold for 3 seconds
The display window at the top
@
and the front
display *
):
show: "Program was terminated".
3.
Close the door.
The programme sequence lasts approx. 1 min. The
display window at the top
@
shows: “Finished”.
4.
Open the door.
5.
Switch off ON/OFF switch
(
.
6.
Close the door.
* depending on the features of your dishwasher
Changing the programme
When the START button
)2
has been pressed, the
programme cannot be changed. The only way
a programme can be changed is by Cancel programme
(Reset).
Cleaning and maintenance
Cleaning and maintenance
A regular inspection and maintenance of your machine
will help to prevent faults. This saves time and prevents
problems.
Overall status of the dishwasher
*The interior of your dishwasher is predominantly self-
cleaning. In order to remove deposits, your dishwasher
automatically changes the running of the programme
(such as by increasing the cleaning temperature) at
certain intervals. This will lead to higher consumption
values when running this programme.
*Depending on the features of your dishwasher
If you should find deposits in the interior of the
dishwasher in spite of this, remove these deposits as
follows:
1.
Fill the detergent dispenser
9:
with detergent.
2.
Select the programme with the highest temperature.
3.
Start the programme without dishes.
:
Warning – Health hazard due to detergents
containing chlorine!
Always use chlorine-free detergents.
Notes
▯
Only clean the appliance with special detergents/
appliance cleaners which are suitable for use with
dishwashers.
▯
Regularly wipe the door seals using a damp cloth
and a little washing-up liquid. This will keep the door
seal clean and hygienic.
▯
Leave the door open slightly if the appliance will not
be used for a while. This will prevent an unpleasant
odour from developing.
▯
Never clean the dishwasher using a steam cleaner.
The manufacturer is not liable for any consequential
damage.
▯
Wipe the front of the dishwasher and the control
panel regularly using a damp cloth and a little
washing-up liquid.
▯
Do not use sponges with a rough surface or abrasive
detergents. These could scratch the surface.
▯
For dishwashers with a stainless steel front, avoid
using sponge cloths, or rinse these thoroughly
several times before using them for the first time.
This will prevent corrosion.
